이전
다음
다아라몰 견적거래 가이드
- 1. 견적거래란?
- 판매 제품에 대해 구매사와 판매사간 거래에 최적화되어 쉽고 편리하게 이용하실 수 있는 서비스입니다.
- 2. 견적 거래 절차 안내
AGMACHINE TECHNO CO
VERTICAL MACHINING CENTER 수직머시닝센터 VMC-1910/VMC-2210
견적거래 제품
대만 본사 직접 판매 '견적문의' 중국어/영어 문의 가능합니다.
- High-Rigidity Structure
- Pulley-Driven Spindle
- Design of High Horse Power Spindle for Heavy-Duty Cutting
- X-Axis Chip Auger
- Three Chip Auger Design
- 최소 구매 수량 : 1
- 주문 수량 단위 : 1
AGMA 제조사
문의전화 : 010-3375-5684 제조사 ‘AGMACHINE TECHNO CO’ 에서 직접 판매하는 제품입니다.
AGMACHINE TECHNO CO
VERTICAL MACHINING CENTER 수직머시닝센터 VMC-1910/VMC-2210
;)
;)
;)
;)
브랜드소개
제품정보
 |  Pulley-Driven SpindleThree spindle alternatives of spindle are available. An enhanced headstock design allows the spindles to run up to 10,000 RPM. All spindles and pulley assemblies are dynamically balanced. A non-slip timing belt ensures the spindle will run smoothly, even at maximum speed. |
 | Design of High Horse Power Spindle for Heavy-Duty Cutting The gear-driven cartridge spindle is capable of reaching speeds of 6,000 RPM. There is a dramatic increase in spindle rigidity due to increased spindle bearing support. This along with a high horsepower spindle motor dramatically enhances the machine's cutting performance. In addition, each gear-driven spindle has a spindle oil cooler used to lower bearing temperature and prolong the spindle life. |
 | X-Axis Chip Auger The chip auger design provides optimal chip disposal and maximizes table cleanness. |
 | Three Chip Auger Design Instead of using a costly chip conveyor, the special three chip auger system efficiently removes metal chips which produced during machining. |
 | Belt-Driven Spindle The spindle headstock has increased rigidity due to the wide stance design of the z-axis ways and the long surface contact between the headstock and way bars. |
 | Gear-Driven Spindle Transmission The two-speed gear transmission allows full power utilization. All gears are made of Chrome Molybdenum alloy steel, heat treated, and precisely ground to ensure the spindle runs quietly and smoothly. Furthermore, the design of the floating tool release mechanism minimizes any pressure exerted on the spindle bearings. |
 | Column with Honeycomb Shape Structure The exclusive honeycomb shape structure design is utilized on the Column of VMC-2210. This design reinforces the headstock support and also enhances the stiffness of the structure. A high stiffness to weight ratio allows excellent dynamic performance during cutting. |
 | Enhanced Base Design The base of VMC-2210 has 6-hardened ways that allow greater stability. Therefore, the saddle and table are fully supported along the entire X and Y-axes travels. |
 | Pressurized Oil Distributor Lubricating oil is evenly distributed to the sliding surfaces of the machine by using Showa oil distributors along with hard-plumbed, low maintenance oil lines. |
 | Hinged-Belt Chip Conveyor (Option) This allows for rapid and efficient chip removal during machining in order to maintain a clean machine. |
 | Double Stoppers Design To prevent the deviation of servo motor housings and bearing housing, two stoppers are equipped for each axis to guarantee absolute axial alignment. |
 | Coolant Thru The Spindle (C.T.S)(Option) Spindle options include coolant through spindle with standard maximum pressure of 20 bar (280 psi). Higher-pressure ratings are also available. |
 | Calibration with Laser Interferometer was Performed and Certified by PMC All of our machines are calibrated according to the "VDI 3441 3∂" standard. Calibration is performed for full travel length for each axis. Each measurement is taken six times to ensure the most consistent and accurate readings. |
 | Electrical Cabinet All electrical components are in compliance with all safety rules and regulations. All components inside the cabinets are clearly labeled and identified for ease of troubleshooting. |
 | Fluorescent Light(Option) This option is installed with the fully enclosed splash guard. The work lights are located on the upper right hand corner and left front side, providing a well-lit table area. |
 | Metal Steps (Option) Metal steps allow the operator to load and unload work pieces easily . This feature is designed for easy operator access into the machine. |
 | Stiff Ballscrew Design for Greater Axial Support All three axes use ISO Class C3 precision ground pre-loaded ballscrews with pretensioned supports on both ends to minimize backlash and compensate the thermal induced error. |
 | Rigid Box Shape Double Deck Table Unique AGMA designed double deck table. This unique design increases the load capacity of worktable for more variety applications, and also minimizes the deformation induced during heat treatment process. |
 | Hand Scraping To ensure consistent high quality , each slide way is hand-scraped. Each axis saddle has Turcite material on it and a special "*" design is used along with a "Z" pattern for efficient oil through. There is an excellent distribution of oil to all axes, so setting time after rap |
| Model | VMC-1910 | VMC-2210 | |
| Spindle | Spindle Taper | No. 50 | |
| Transmission | Belt/Gear | ||
| Spindle Speed | 8,000/6,000 r.p.m. | ||
| Table | Table Size | 2,100mm x 1,000mm (82.68" x 39.37")Std. 2,100mm x 900mm (82.68" x 35.43")Opt. | 2,400mm x 1,000mm (94.49" x 39.37")Std. 2,400mm x 900mm (94.49" x 35.43")Opt. |
| T-Slot Size | 18mm x 7 x 150mm (0.71" x 7 x 5.91")Std. 18mm x 6 x 150mm (0.71" x 6 x 5.91")Opt. | ||
| Work Area | 1,900mm x 1,000mm (74.80" x 39.37")Std. 1,900mm x 900mm (74.80" x 35.43")Opt. | 2,200mm x 1,000mm (86.61" x 39.37")Std. 2,200mm x 900mm (86.61" x 35.43")Opt. | |
| Max. Table Load | 3,000kgs (6,600 lbs) | 4,000kgs (8,800 lbs) | |
| Travel & Feedrate | X Axis | 1,900mm (74.80") | 2,200mm (86.61") |
| Y Axis | 1,000mm(39.37")Std./ 900mm (35.43")Opt. | ||
| Z Axis | 800mm (31.50") | ||
| Distance from Spindle Nose to Table | 150~950mm (5.91"~37.40") | ||
| Distance from Spindle Center to Column Ways | 1,100mm(43.31")Std./980mm (38.58")Opt. | ||
| Rapid Traverse | X, Y =12 M/Min (590 IPM) Z=10 M/Min (393 IPM) | ||
| Cutting Feedrate | X, Y, Z: 1~10,000mm/min (393 IPM) | ||
| ATC | Tool Shank | BT/CAT-50 | |
| Pull Stud | MAS P50T-1(45º) | ||
| Magazine Capacity | 32 Tools | ||
| Max. Tool Diameter (with adjacent pocket empty) | Ø250mm(9.84") | ||
| Max. Tool Diameter (full storage) | Ø125mm(4.92") | ||
| Max. Tool Length | 300mm (11.81") | ||
| Max. Tool Weight | 15kgs (33 lbs) | ||
| ATC Type | Cam Driven Arm Type | ||
| Motor | Spindle(Cont./30min.) | 18.5/22Kw (25/30 HP) Belt 15/18.5Kw (20/25 HP) Gear | |
| X/Y/Z Axes(Fanuc) | 7Kw (9.33 HP) | ||
| Lubrication Pump | 0.025Kw (0.033 HP) | ||
| Coolant Pump | 0.49Kw (0.66 HP) | ||
| Misc. | Machine Height | 3,600mm (142") | |
| Floor Space | 5,100mm x 3,900mm (201" x 154") | 5,700mm x 3,900mm (225" x 154") | |
| Machine Weight | 18,000kgs (39,600 lbs) | 20,000kgs (44,000 lbs) | |
| Control | Fanuc 0iMF | ||
월 ~ 금요일 오전 9시 ~ 오후 6시 까지
010-3375-5684
