다아라몰 견적거래 가이드
- 1. 견적거래란?
- 판매 제품에 대해 구매사와 판매사간 거래에 최적화되어 쉽고 편리하게 이용하실 수 있는 서비스입니다.
- 2. 견적 거래 절차 안내
마르포스㈜
선반용 공구 검사 프로브
견적거래 제품
견적거래
- Tool length
- 최소 구매 수량 : 1
- 주문 수량 단위 : 1
마르포스 제조사
문의전화 : 0504-3175-2673 제조사 ‘마르포스㈜’ 에서 직접 판매하는 제품입니다.
;)
;)
;)
;)
제품정보
The A90K probe line represents a complete range of compact applications based on the following, easy to understand operating principle: At the instant the tool cutting edge comes into contact with the probe, the system generates a highly repeatability signal, which is transmitted to the CNC. The tool measurement, which is generated by processing the signal, is compared with the nominal value that has already been saved in the CNC, in order to determine tool wear and breakage.
All the check and measurement operations are performed during a single phase, which offers the dual advantage of reducing production times and eliminating the risk of damage to the machine resulting from human errors when setting up the tool parameters.
The probes are used for the following checks:
- Tool breakage, in order avoid the risk of damaging the work piece and the machine, and the resulting loss of production time
- Tool length
- Tool wear compensation, in order to optimise working life
- Tool offset calculations, in order to reduce set-up times and eliminate the need to pre-set the tool outside the machine
월 ~ 금요일 오전 9시 ~ 오후 6시 까지
0504-3175-2673
